RCT60H TANDEM ROLLER
Versatile Compaction
INTUITIVE OPERATOR CONTROLS
RCT60H With selectable vibration frequencies further improve productivity and allow operators to dial the machine in to meet the specific compaction needs of the job site. Its high amplitude gives it the capacity to achieve a tons-per-day production rate that makes it an excellent match for small parking lots, lane additions, or other similar-sized jobs.
EFFICIENT PERFORMANCE
Reliable water spray system, easy access to engine service points, the robust hitch design easily supports a single lift point option, excellent drum-edge visibility enhances control for better coverage and compaction results.
SIMPLE OPERATION
The ergonomic operating environment improved comfort, spacious seating and easy access due to logically placed handles and lower platform height, simple operation with mechanical propel and speed control levers
RELIABILITY
Powerful, safety and serviceability engine features that protect machinery, operators and bystanders alike, allow good performance in harsh environments as well as minimize downtime.
| Engine Make / Model | Rhino® ZN390Q |
| Peak Power kW (Hp) @ 2,600 rpm | 34(45) |
| Peak Torque Nm (ft-lb) @ 1,800 rpm | 138(102) |
| Displacement L (cu. In) | 2.4(146) |
| Fuel System | Direct Injection |
| Lubrication | Full-flow spin-on filter |
| Aspiration | Natural |
| Machine with Cab Kg (lb) | 6,000(13,228) |
| Front Static Linear Load kg/cm (lb/in) | 20.8(12) |
| Rear Static Linear Load kg/cm (lb/in) | 23.3(13) |
| Max. Frequency Hz (vpm) | 50(3,000) |
| Centrifugal Force kN(lbf) | 60(13,489) |
| Nominal Amplitude mm(in) | 0.5(0.02) |
| Pump Type | Axial piston pump, Variable displacement, Closed Center |
| Vibration Type | Axial piston motors, Constant displacement |
| System Pressure Mpa (psi) | 30(4,351) |
| Vibration System Pressure Mpa (psi) | 12(1,740) |
| Steering System Pressure Mpa (psi) | 10(1,450) |
| Fuel Tank L(gal) | 120(32) |
| Engine Oil L(gal) | 10(2.6) |
| Hydraulic Tank L(gal) | 100(26) |
| Water Tank L(gal) | 550(145) |
| Overall Width mm (ft) | 1,550(5.1) |
| Overall Length mm (ft) | 3,490(11.5) |
| Max. Machine Height mm (ft) | 2,580(8.5) |
| Wheelbase mm (ft) | 2,500(8.2) |
| Ground Clearance mm (ft) | 280(0.9) |
| Outside Turning Radius mm (ft) | 6,000(19.7) |
| Inside Turning Radius mm (ft) | 3,800(12.5) |
| Articulation Angle | 35 degrees |
| Gradeability | 10 degrees |
| Drum Width mm (in) | 1,350(53.1) |
| Drum Shell Thickness mm (in) | 25(1.0) |
| Drum Diameter mm (in) | 950(37.4) |
EN 
ES 
FR 
PT