RCT40H TANDEM ROLLER
Productive and Simple to Operate
EASY TO USE, EASY TO KEEP SAFE AND SECURE AND EASY TO SERVICE
RCT40H Brings excellent manoeuvrability and constant contact with the surface are critical factors in achieving high-quality compaction. Perfect all-around machine visibility to maximize safety on the job site. Rhino Tandem Rollers are easy to use, easy to keep safe and secure and easy to service.
EFFICIENT PERFORMANCE
Reliable water spray system, easy access to engine service points, the robust hitch design easily supports a single lift point option, excellent drum-edge visibility enhances control for better coverage and compaction results.
SIMPLE OPERATION
The ergonomic operating environment improved comfort, spacious seating and easy access due to logically placed handles and lower platform height, simple operation with mechanical propel and speed control levers
RELIABILITY
Powerful, safety and serviceability engine features that protect machinery, operators and bystanders alike, allow good performance in harsh environments as well as minimize downtime.
| Engine Make / Model | Rhino® ZN390Q |
| Peak Power kW (Hp) @ 2,600 rpm | 22(30) |
| Peak Torque Nm (ft-lb) @ 1,800 rpm | 103(76) |
| Displacement L (cu. In) | 1.8(110) |
| Fuel System | Direct Injection |
| Lubrication | Full-flow spin-on filter |
| Aspiration | Natural |
| Machine with Cab Kg (lb) | 4,000(8,818) |
| Front Static Linear Load kg/cm (lb/in) | 15.0(9) |
| Rear Static Linear Load kg/cm (lb/in) | 18.4(11) |
| Max. Frequency Hz (vpm) | 50(3,000) |
| Centrifugal Force kN(lbf) | 39(8,768) |
| Pump Type | Axial piston pump, Variable displacement, Closed Center |
| Vibration Type | Axial piston motors, Constant displacement |
| System Pressure Mpa (psi) | 28(4,061) |
| Vibration System Pressure Mpa (psi) | 10(1,450) |
| Steering System Pressure Mpa (psi) | 8(1,160) |
| Fuel Tank L(gal) | 80(21) |
| Engine Oil L(gal) | 7(2) |
| Hydraulic Tank L(gal) | 95(25)24(3,481) |
| Water Tank L(gal) | 350(92) |
| Overall Width mm (ft) | 1,420(4.7) |
| Overall Length mm (ft) | 3,180(4.7) |
| Max. Machine Height mm (ft) | 2,650(8.7) |
| Wheelbase mm (ft) | 2,200(7.2) |
| Ground Clearance mm (ft) | 300(1.0) |
| Outside Turning Radius mm (ft) | 6,000(19.7) |
| Inside Turning Radius mm (ft) | 3,800(12.5) |
| Articulation Angle | 35 degrees |
| Gradeability | 10 degrees |
| Drum Width mm (in) | 1,200(47.2) |
| Drum Shell Thickness mm (in) | 25(1.0) |
| Drum Diameter mm (in) | 900(35.4) |
EN 
ES 
FR 
PT